Kit 11 mm Hiilos clasps and endcaps for a 1 cm bracelet

$18.00
/
Tax included. Shipping calculated at checkout.
Finishing

1 Ultra light magnetic clasp 22 mm and 2 endcaps of 20 mm for a 2 cm bracelet

We attach 2 end caps to the bracelet (one at each end) and then the end caps slip into the clasp.


FEATURES

  • Clasp without Nickel, Cadmium and Lead.
  • Clasp in Polyester and ABS / PC, light and resistant, with a color or precious metal finish
  • The lightness prevents the bracelet from turning due to the weight of the metal.
  • This product is the result of long work. Entirely designed and manufactured in France, this Interchangeable Clasp will allow you to slip and remove all the bracelets that make you crack. The magnet is aesthetically camouflaged inside the Clasp.

Once you have the clasps, all you have to do is mix your bracelets. Make way for your creativity.

Advice on keeping your clasp in good condition:

Avoid putting it underwater for reasons of oxidation

Clean your clasp with a simple cotton pad before blowing the dust to prevent it from scratching the coating. Do not put chemicals on the clasps. Soapy water can be used in case of heavy soiling.

Démo Video: 

Clasps are available in

  • 3 sizes: 11 - 22 and 45 mm (0.43 - 0.86 and 1.77 inches)
  • 2 finishes:
    • Precious metals: 24 carat gold, rose gold, platinum
    • Colors: black, blue, pink, yellow, green, white

End caps are available in 3 sizes: 10 - 20 and 40 mm (0.39 - 0.78 and 1.57 inches)

  • 11mm clasp (0.43 in) should have 10mm (0.39 in) end caps
  • A 22 mm clasp (0.86 in) can accommodate
    • one 20 mm (0.78in) end cap
    • two 10 mm (0.39 in) end caps.
  • A 45 mm clasp (0.1.77 in) can accommodate
    • two end pieces of 20mm (0.78 in) ,
    • 4 end pieces of 10 (0.39 in) ,
    • two of 10 (0.39 in) and one of 20 mm (0.78 in)
    • and finally one of 40 mm (1.57 in)

Then, the bracelets slide in and out of the interchangeable clasps very easily. Just close it on your wrist to block the bracelets that no longer move..

The bracelets slip on and off from the interchangeable clasps very easily.

CHARACTERISTICS

  • Clasp without Nickel, Cadmium or Lead.
  • Polyester and ABS / PC clasp, light and resistant, with a black finish or precious metals: 24 karat gold, rose gold or platine.
  • The lightness ensures that the bracelet does not turn due to the weight of the metal.
  • This product is the result of hard work. Entirely designed and made in France, this Interchangeable Clasp will allow you to slip on and remove all the bracelets that make you crack. The magnet is aesthetically camouflaged inside the Clasp.

Once you have the clasps, all you have to do is mix your bracelets. Make way for your creativity.

If you want to make your bracelet yourself, don't forget to also buy the end caps, essential to use the clasp. They are provided on the bracelets I make.

Advice on keeping your clasp in good condition:

Avoid putting it under water for oxidation reasons

Clean your clasp with a simple cotton ball, having previously blown off the dust to prevent it from scratching the coating. Do not put chemicals on the clasps. Soapy water can be used in the event of heavy soiling.

Perfectly to your taste

Customize!

You can request a personalization of the proposed creations; change in size, width, colors, finishes. On each product sheet, you will find a contact form that allows you to contact me about a specific creation ...

You can also look for inspiration in the Patterns section to ask to redo a piece which is no longer in the collection

Back to Interchangeable magnetic clasps